Page Header

Home > ONLINE FIRST > Al-Jubouri

Multicomponent Equilibrium Isotherms and Kinetics Study of Heavy Metals Removal from Aqueous Solutions Using Electrocoagulation Combined with Mordenite Zeolite and Ultrasonication

Sama Mohammed Al-Jubouri, Rasha Habeeb Salman, Entisar Mohsen Khudhair, Ammar Salih Abbas, Ahmed Faiq Al-Alawy, Sajad Yas Khudhair, Miqat Hasan Salih, Hassanain Abbas Hassan, Abdullatif Alfutimie

Abstract


Combining different treatment strategies successively or simultaneously has become recommended to achieve high purification standards for the treated discharged water. The current work focused on combining electrocoagulation, ion-exchange, and ultrasonication treatment approaches for the simultaneous removal of copper, nickel, and zinc ions from water. The removal of the three studied ions was significantly enhanced by increasing the power density (4–10 mA/cm2) and NaCl salt concentration (0.5–1.5 g/L) at a natural solution pH. The simultaneous removal of these metal ions at 4 mA/cm2 and 1 g NaCl/L was highly improved by introducing 1 g/L of mordenite zeolite as an ion-exchanger. A remarkable removal of heavy metals was reported, as the initial concentration of each metal decreased from approximately 50 ppm to 1.19 for nickel, 3.06 for zinc, and less than 1 ppm for copper. In contrast, ultrasonication did not show any improvement in the treatment process. The extended Langmuir isotherm model convincingly described the experimental data; the Temkin and Dubinin-Radushkevich isotherm models have proven that the removal processes were physical and exothermic. Finally, the pseudo-second-order kinetics model appropriately explained the kinetics of the process with correlation coefficients of 0.9337 and 0.9016, respectively.

Keywords



[1]    A. H. Sulaymon, B. A. Abdulmajeed, and A. B. Salman, “Electrochemical removal of cadmium from simulated wastewater using a smooth rotary cylinder electrode,” Desalination and Water Treatment, vol. 54, no. 9, pp. 2557–2563, 2015, doi: 10.1080/19443994.2014.903520.

[2]    A. H. Sulaymon, B. A. Abdulmajeed, and A. B. Salman, “Removal of cadmium from simulated wastewater by using stainless steel concentric tubes electrochemical reactor,” Desalination and Water Treatment, vol. 68, pp. 220–225, 2017, doi: 10.5004/dwt.2017.20418.

[3]    S. M. Al-Jubouri, S. I. Al-Batty, R. Ramsden, J. Tay, S. M. Holmes, and S. M. Al, “Elucidation of the removal of trivalent and divalent heavy metal ions from aqueous solutions using hybrid-porous composite ion-exchangers by nonlinear regression,” Desalination and Water Treatment, vol. 236, pp. 171–181, 2021, doi: 10.5004/ dwt.2021.27707.

[4]  P. E. Dim and M. Termtanun, “Treated clay mineral as adsorbent for the removal of heavy metals from aqueous solution,” Applied Science and Engineering Progress, vol. 14, no. 3, pp. 511–524, 2021, doi:  10.14416/j.asep.2021.04.002.  

[5]    A. H. Mahvi, B. Davoud, and E. Bazrafshan, “Remarkable reusability of magnetic Fe3O4-graphene oxide composite: A highly effective adsorbent for Cr(VI) ions,” International Journal of Environmental Analytical Chemistry, vol. 103, no. 15, pp. 3501–3521, 2023, doi: 10.1080/03067319.2021.1910250.  

[6]    I. Ali, A. E. Burakov, A. V. Melezhik, A. V. Babkin, I. V. Burakova, E. A. Neskoromnaya, E. V. Galunin, A. G. Tkachev, and D. V. Kuznetsov, “Removal of copper(ii) and zinc(ii) ions in water on a newly synthesized polyhydroquinone/graphene nanocomposite material: Kinetics, thermodynamics and mechanism,” ChemistrySelect, vol. 4, no. 43, pp. 12708–12718, Nov. 2019, doi: 10.1002/slct. 201902657.

[7]    L. Wang, J. Li, J. Wang, X. Guo, X. Wang, J. Choo, and L. Chen, “Green multi-functional monomer based ion imprinted polymers for selective removal of copper ions from aqueous solution,” Journal of Colloid and Interface Science, vol. 541, pp. 376–386, Apr. 2019, doi: 10.1016/j.jcis.2019.01.081.

[8]    K. T. Kubra, M. S. Salman, M. N. Hasan, A. Islam, M. M. Hasan, and M. R. Awual, “Utilizing an alternative composite material for effective copper(II) ion capturing from wastewater,” Journal of Molecular Liquids, vol. 336, Aug. 2021, Art. no. 116325, doi: 10.1016/j.molliq. 2021.116325.

[9]    O. A. Oyewo, B. Mutesse, T. Y. Leswifi, and M. S. Onyango, “Highly efficient removal of nickel and cadmium from water using sawdust-derived cellulose nanocrystals,” Journal of Environmental Chemical Engineering, vol. 7, no. 4, Aug. 2019, Art. no. 103251, doi: 10.1016/j.jece.2019.103251.

[10] S. Rangabhashiyam, R. Jayabalan, M. Asok Rajkumar, and P. Balasubramanian, “Elimination of toxic heavy metals from aqueous systems using potential biosorbents: A review,” Springer Transactions in Civil and Environmental Engineering, pp. 291–311, Jul. 2018, doi: 10.1007/978-981-13-1202-1_26.    

[11] A. Selvi, A. Rajasekar, J. Theerthagiri, A. Ananthaselvam, K. Sathishkumar, J. Madhavan, and P. Rahman, “Integrated remediation processes toward heavy metal removal/recovery from various environments-A review,” Frontiers in Environmental Science, vol. 7, May 2019, doi: 0.3389/fenvs.2019.00066.   

[12]  V. G. Georgieva, Lenia Gonsalvesh, and M. P. Tavlieva, “Thermodynamics and kinetics of the removal of nickel (II) ions from aqueous solutions by biochar adsorbent made from agro-waste walnut shells,” Journal of Molecular Liquids, vol. 312, Aug. 2020, Art. no. 112788, doi: 10.1016/j.molliq.2020.112788.

[13]  A. J. Bora and R. K. Dutta, “Removal of metals (Pb, Cd, Cu, Cr, Ni, and Co) from drinking water by oxidation-coagulation-absorption at optimized pH,” Journal of Water Process Engineering,  vol. 31, Oct. 2019, Art. no. 100839, doi:10.1016/ j.jwpe.2019.100839.

[14]  A. F. Al-Alawy and M. H. Salih, “Experimental study and mathematical modelling of zinc removal by reverse osmosis membranes,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 17, pp. 57–73, 2016.

[15]  A. Wołowicz and M. Wawrzkiewicz, “Screening of ion exchange resins for Hazardous Ni(ii) removal from aqueous solutions: Kinetic and equilibrium batch adsorption method,” Processes, vol. 9, no. 2, pp. 285–285, Feb. 2021, doi: 10.3390/pr9020285.

[16]  A. B. Salman, “Electrodeposition of lead from simulated wastewater using stainless steel tubes bundle as cathode,” Recent Innovations in Chemical Engineering, vol. 12, no. 2, pp. 143–159, Sep. 2019, doi: 10.2174/2405520412666190531114218.

[17]  R. T. Hadi, A. B. Salman, S. Nabeel, and S. A. Soud, “Recovery of lead from simulated wastewater by using stainless steel rotating cylinder electrode electrochemical reactor,” Desalination and Water Treatment, vol. 99, pp. 266–271, 2017, doi: 10.5004/dwt.2017.21723.

[18] E. Bazrafshan, M. Sobhanikia, F. K. Mostafapour, H. Kamani, D. Balarak, “Chromium biosorption from aqueous environments by mucilaginous seeds of Cydonia oblonga: Thermodynamic, equilibrium and kinetic studies,” Global NEST Journal, vo. 19, no. 2, pp. 269–277, 2017, doi: 10.30955/gnj.001708.

[19]  F. K. Mostafapour, A. H. Mahvi, A. D. Khatibi, M. Khodadadi Saloot, N. Mohammadzadeh, and D. Balarak, “Adsorption of lead(II) using bioadsorbent prepared from immobilized Gracilaria corticata algae: Thermodynamics, kinetics and isotherm analysis,” Desalination and Water Treatment, vol. 265, pp. 103–113, 2022, doi: 10.5004/dwt.2022.28627.

[20]  C. H. Huang, S. Y. Shen, C. D. Dong, M. Kumar, and J. H. Chang, “Removal mechanism and effective current of electrocoagulation for treating wastewater containing Ni(II), Cu(II), and Cr(VI),” Water, vol. 12, no. 9, pp. 2614–2614, Sep. 2020, doi: 10.3390/w12092614.

[21]  E. Gatsios, J. N. Hahladakis, and E. Gidarakos, “Optimization of electrocoagulation (EC) process for the purification of a real industrial wastewater from toxic metals,” Journal of Environmental Management, vol. 154, pp. 117–127, May 2015, doi: 10.1016/j.jenvman.2015.02.018.

[22]  S. Ayub, A. A. Siddique, M. S. Khursheed, A. Zarei, I. Alam, E. Asgari, and F. Changani, “Removal of heavy metals (Cr, Cu and Zn) from electroplating wastewater by electrocoagulation and adsorption processes,” Desalination and Water Treatment, vol. 179, pp. 263–271, 2020, doi: 10.5004/dwt.2020.25010.

[23] L. K. Akula, R. K. Oruganti, D. Bhattacharyya, and K. K. Kurilla, “Treatment of marigold flower processing wastewater using a sequential biological- Electrochemical process,” Applied Science and Engineering Progress, vo. 14, no. 3, pp. 525–542, 2021, doi: 10.14416/j.asep.2021. 04.001.

[24]  R. H. Salman, E. M. Khudhair, K. M. Abed, and A. S. Abbas, “Removal of E133 brilliant blue dye from artificial wastewater by electrocoagulation using cans waste as electrodes,” Environmental Progress & Sustainable Energy, vol. 43, no. 2, Oct. 2023, doi: 10.1002/ep.14292.

[25]  R. H. Salman and A. H. Abbar, “Optimization of a combined electrocoagulation-electro-oxidation process for the treatment of Al-Basra Majnoon Oil field wastewater: Adopting a new strategy,” Chemical Engineering and Processing, vol. 183, Jan. 2023, Art. no. 109227, doi: 10.1016/j.cep. 2022.109227.

[26]  F. Ilhan, K. Ulucan-Altuntas, Y. Avsar, U. Kurt, and A. Saral, “Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy consumption,” Frontiers of Environmental Science & Engineering, vol. 13, no. 5, Sep. 2019, doi: 10.1007/s11783-019-1152-1.

[27]  R. H. Salman, “Removal of manganese ions (Mn2+) from a simulated wastewater by electrocoagulation/ electroflotation technologies with stainless steel mesh electrodes: Process optimization based on taguchi approach,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 20, no. 1, pp. 39–48, Mar. 2019, doi: 10.31699/ijcpe.2019.1.6.

[28]  J. N. Hakizimana, B. Gourich, M. Chafi, Y. Stiriba, C. Vial, P. Drogui, and J. Naja, “Electrocoagulation process in water treatment: A review of electrocoagulation modeling approaches,” Desalination, vol. 404, pp. 1–21, Feb. 2017, doi: 10.1016/j.desal.2016.10.011.

[29]  C. An, G. Huang, Y. Yao, and S. Zhao, “Emerging usage of electrocoagulation technology for oil removal from wastewater: A review,” Science of the Total Environment, vol. 579, pp. 537–556, Feb. 2017, doi: 10.1016/j.scitotenv. 2016.11.062.

[30]  B. M. Favero, A. C. Favero, D. C. da Silva, P. Hubner, F. S. Souza, and J. B. S. Hamm, “Treatment of galvanic effluent through electrocoagulation process: Cr, Cu, Mn, Ni removal and reuse of sludge generated as inorganic pigment,” Environmental Technology, vol. 43, pp. 3107–3120, 2022, doi:  10.1080//09593330.2021.1916089.

[31]  M. M. Hossain, M. I. Mahmud, M. S. Parvez, and H. M. Cho, “Impact of current density, operating time and ph of textile wastewater treatment by electrocoagulation process,” Environmental Engineering Research, vol. 18, no. 3, pp. 157–161, Sep. 2013, doi: 10.4491/eer.2013.18.3.157.

[32]  M. Nasrullah, N. Islam, and A. W. Zularisam, “Effect of high current density in electrocoagulation process for sewage treatment,” Asian Journal of Chemistry, vol. 26, no. 14, pp. 4281–4285, Jan. 2014, doi: 10.14233/ajchem.2014.16134.

[33] H. M. Ibrahim and R. H. Salman, “Study the optimization of petroleum refinery wastewater treatment by successive electrocoagulation and electro-oxidation systems,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 23, no. 1, pp. 31–41, Mar. 2022, doi: 10.31699/ijcpe. 2022.1.5.

[34]  E. Keshmirizadeh, S. Yousefi, and M. K. Rofouei, “An investigation on the new operational parameter effective in Cr(VI) removal efficiency: A study on electrocoagulation by alternating pulse current,” Journal of Hazardous Materials, vol. 190, no. 1–3, pp. 119–124, Jun. 2011, doi: 10.1016/j.jhazmat.2011.03.010.

[35]  F. Hussin, M. Aroua, and M. Szlachta, “Combined solar electrocoagulation and adsorption processes for Pb(II) removal from aqueous solution,” Chemical Engineering and Processing, vol. 143, Sep. 2019, Art. no. 107619, doi: 10.1016/j.cep.2019.107619.

[36]  N. S. Graça and A. E. Rodrigues, “The combined implementation of electrocoagulation and adsorption processes for the treatment of wastewaters,” Clean Technologies, vol. 4, no. 4, pp. 1020–1053, Oct. 2022, doi: 10.3390/ cleantechnol4040063.

[37]  E. Bazrafshan, M. R. Alipour, and A. H. Mahvi, “Textile wastewater treatment by application of combined chemical coagulation, electrocoagulation, and adsorption processes,” Desalination and Water Treatment, vol. 57, pp. 9203–9215, 2016, doi: 10.1080//19443994.2015.1027960.

[38]  Y. Dehghani, B. Honarvar, A. Azhdarpour, and M. Nabipour, “Treatment of wastewater by a combined technique of adsorption, electrocoagulation followed by membrane separation,” Advances in Environmental Technology, vol. 7, no. 3, pp. 171–183, Aug. 2021, doi: 10.22104/aet.2021. 5133.1394.

[39]  A. Aouni, R. Lafi, and A. Hafiane, “Feasibility evaluation of combined electrocoagulation/ adsorption process by optimizing operating parameters removal for textile wastewater treatment,” Desalination Water Treatment, vol. 60, pp. 78–87, 2017, doi:  10.5004/dwt.2017.10890.

[40]  S. M. Al-Jubouri, S. I. Al-Batty, S. Senthilnathan, N. Sihanonth, L. Sanglura, H. Shan, and S. M. Holmes, “Utilizing Faujasite-type zeolites prepared from waste aluminium foil for competitive ion-exchange to remove heavy metals from simulated wastewater,” Desalination Water Treatment, vol. 231, pp. 166–181, 2021, doi: 10.5004/dwt.2021.27461.

[41]  H. N. Alfalahy and S. M. Al-Jubouri, “Preparation and application of polyethersulfone ultrafiltration membrane incorporating NaX zeolite for lead ions removal from aqueous solutions,” Desalination Water Treatment, vol. 248, pp. 149–162, 2022, doi: 10.5004/dwt.2022.28072.

[42]  P. Nie, B. Hu, X. Shang, Z. Xie, M. Huang, and J. Liu, “Highly efficient water softening by mordenite modified cathode in asymmetric capacitive deionization,” Separation and Purification Technology, vol. 250, Nov. 2020, Art. no. 117240, doi: 10.1016/j.seppur.2020.117240.

[43]  K. M. Wojciechowska, M. Król, T. Bajda, and W. Mozgawa, “Sorption of heavy metal cations on mesoporous ZSM-5 and mordenite zeolites,” Materials, vol. 12, no. 19, pp. 3271–3271, Oct. 2019, doi: 10.3390/ma12193271.

[44] P. Asaithambi, A. Raman, B. Sajjadi, and W. Mohd, “Sono assisted electrocoagulation process for the removal of pollutant from pulp and paper industry effluent,” Environmental Science and Pollution Research International, vol. 24, no. 6, pp. 5168–5178, May 2016, doi: 10.1007/s11356-016-6909-5.

[45]  H. M. Lankapati, D. R. Lathiya, L. Choudhary, A. K. Dalai, and K. C. Maheria, “Mordenite‐type zeolite from waste coal fly ash: Synthesis, characterization and its application as a sorbent in metal ions removal,” ChemistrySelect, vol. 5, no. 3, pp. 1193–1198, Jan. 2020, doi: 10.1002/ slct.201903715.

[46]  P. Intarapong, S. Iangthanarat, and P. Phanthong, “Activity and basic properties of KOH/mordenite for transesterification of palm oil,” Journal of Energy Chemistry, vol. 22, no. 5, p. 690, Sep. 2013.

[47]  A. T. Tiruneh, T. Y. Debessai, G. C. Bwembya, and S. J. Nkambule, “Combined clay adsorption-coagulation process for the removal of some heavy metals from water and wastewater,” American Journal of Environmental Engineering, vol. 8, no. 2, pp. 25–35, 2018, doi: 10.5923/ j.ajee.20180802.02.

[48]  N. M. Niza, M. S. Yusoff, M. A. A. Mohd Zainuri, M. I. Emmanuel, A. M. H. Shadi, and M. A. Kamaruddin, “Performance of batch electrocoagulation with vibration-induced electrode plates for landfill leachate treatment,” Journal of Water Process Engineering, vol. 36, Aug. 2020, Art. no. 101282, doi: 10.1016/ j.jwpe.2020.101282.

[49]  F. Özyonar, Ö. Gökkuş, M. Sabuni, “Removal of disperse and reactive dyes from aqueous solutions using ultrasound-assisted electrocoagulation,” Chemosphere, vol. 258, Nov. 2020, Art. no. 127325, doi: 10.1016/j.chemosphere.2020.127325.

[50]  N. V. Medvidović, L. Vrsalović, S. Svilović, and M. Cestarić, “Comparison of electrocogulation couples with synthetic zeolite, ultrasound and two steps electrocogulation,” Journal of Sustainable Technologies and Materials, vol. 2, no. 3, pp. 1–10, Dec. 2022, doi: 10.57131/jstm. 2022.3.1.

[51]  N. Amrutha, G. Jeppu, C. R. Girish, B. Prabhu, and K. Mayer, “Multi-component adsorption isotherms: Review and modeling studies,” Environmental Processes, vol. 10, no. 2, Jun. 2023, doi: 10.1007/s40710-023-00631-0.

[52]  A. J. Jadhav and V. C. Srivastava, “Multicomponent adsorption isotherm modeling using thermodynamically inconsistent and consistent models,” AIChE Journal, vol. 65, no. 11, Jul. 2019, doi:10.1002/aic.16727.

[53] F. K. Al-Jubory, A. S. Abbas, and I. M. Mujtaba, “Adsorptive removal of ciprofloxacin from simulated wastewater using crosslinked starch ester: Isotherms, kinetics, thermodynamics, modeling, and simulation for continuous operation,” Chemical Engineering Research & Design, vol. 200, pp. 332–343, Dec. 2023, doi: 10.1016/j.cherd.2023.10.051.

[54] S. Barno and A. S. Abbas, “Reduction of organics in dairy wastewater by adsorption on a prepared charcoal from iraqi sugarcane,” IOP Conference Series. Materials Science and Engineering, vol. 736, no. 2, Jan. 2020, Art. no. 022096, doi: 10.1088/1757-899x/736/2/022096.

[55]  S. Sohn and D. Kim, “Modification of Langmuir isotherm in solution systems—definition and utilization of concentration dependent factor,” Chemosphere, vol. 58, no. 1, pp. 115–123, Jan. 2005, doi: 10.1016/j.chemosphere.2004.08.091.

[56]  S. K. Pereira, S. Kini, B. Prabhu, and G. P. Jeppu, “A simplified modeling procedure for adsorption at varying pH conditions using the modified Langmuir–Freundlich isotherm,” Applied Water Science, vol. 13, no. 1, Dec. 2022, doi: 10.1007/s13201-022-01800-6.

[57]  C. Stefanne, B. Galdeano, R. Landers, Carlos, and M. Gurgel, “Equilibrium study of binary mixture biosorption of Cr(III) and Zn(II) by dealginated seaweed waste: Investigation of adsorption mechanisms using X-ray photoelectron spectroscopy analysis,” Environmental Science and Pollution Research International, vol. 26, no. 28, Aug. 2018, Art. no. 28480, doi: 10.1007/s11356-018-2880-7.

[58]  V. C. Srivastava, I. D. Mall, and I. M. Mishra, “Removal of cadmium(II) and zinc(II) metal ions from binary aqueous solution by rice husk ash,” Colloids and Surfaces. A, Physicochemical and Engineering Aspects, vol. 312, no. 2–3, pp. 172–184, Jan. 2008, doi: 10.1016/j.colsurfa.2007.06.048.

[59] A. Alameri, R. Alfilh, S. Awad, G. Zaman, T. J. Al-Musawi, M. Joybari, D. Balarak, and McKay, “Ciprofloxacin adsorption using magnetic and ZnO nanoparticles supported activated carbon derived from Azolla filiculoides biomass,” Biomass Conversion and Biorefinery, Oct. 2022, doi: 10.1007/s13399-022-03372-6.

[60] R. K. Abid and A. S. Abbas, “Adsorption of organic pollutants from real refinery wastewater on prepared cross-linked starch by epichlorohydrin,” Data in Brief, vol. 19, pp. 1318–1326, Aug. 2018, doi: 10.1016/j.dib.2018.05.060.

[61]  Z. Al-Qodah, M. Tawalbeh, M. Al-Shannag, Z. Al-Anber, and K. Bani-Melhem, “Combined electrocoagulation processes as a novel approach for enhanced pollutants removal: A state-of-the-art review,” Science of the Total Environment, vol. 744, Nov. 2020, Art. no. 140806, doi: 10.1016/j.scitotenv.2020.140806.

[62]  S. U. Khan, M. Khalid, K. Hashim, M. H. Jamadi, M. Mousazadeh, F. Basheer, and I. H. Farooqi, “Efficacy of electrocoagulation treatment for the abatement of heavy metals: An overview of critical processing factors, kinetic models and cost analysis,” Sustainability, vol. 15, no. 2, pp. 1708–1708, Jan. 2023, doi: 10.3390/su15021708.

[63] A. S. Abbas and S. A. Hussien, “Equilibrium, kinetic and thermodynamic study of aniline adsorption over prepared ZSM-5 zeolite,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 18, no. 1, pp. 47–56, Mar. 2017, doi: 10.31699/ijcpe.2017.1.4.

[64]  M. Ghahrchi, A. Rezaee, and A. Adibzadeh, “Study of kinetic models of olive oil mill wastewater treatment using electrocoagulation process,” Desalination and Water Treatment, vol. 211, pp. 123–130, 2021, doi: 10.5004/dwt.2021.26516.

[65]  A. A. Moneer, N. M. El-Mallah, M. M. El-Sadaawy, M. Khedawy, and M. S. H. Ramadan, “Parameters optimization, kinetics, isotherm modeling of cationic and disperse dyes removal procedure using bi-polar iron electrocoagulation system,” Desalination and Water Treatment, vol. 256, pp. 300–313, 2022, doi: 10.5004/dwt. 2022.28416.

Full Text: PDF

DOI: 10.14416/j.asep.2024.07.011

Refbacks

  • There are currently no refbacks.


Copyright © 2022 by King Mongkut’s University of Technology North Bangkok. All rights reserved.