Page Header

Home > ONLINE FIRST > Makhatha

Characterization of Polyvinylpyrrolidone-2-Acrylamide-2-Methlypropansulphonic Acid Based Polymer as a Corrosion Inhibitor for Copper and Brass in Hydrochloric Acid

Mamookho Elizabeth Makhatha, George M. Tsoeunyane, Luyanda Masana Yvette Maqubela, Sergei Sherbakov, Daria Podgayskaya, Vishwanatha H. M., Pawan Kumar

Abstract


Copper and its alloy are susceptible to corrosion in heat exchangers during acid cleaning. The corrosion leads to materials loss and damage; hence it is important to prohibit such corrosion damage using an eco-friendly corrosion inhibitor. In the current work, a polymer composite-based corrosion inhibitor was prepared using polyvinylpyrrolidone (PVP) and 2-Acrylamido-2-methylpropane sulfonic acid (AMPS). The PVP copolymer undergoes polymerization with the AMPS having several interconnected uniformly sized pores and produces a PVP–AMPS composite with rod-like microstructure. The effect of concentration, time, and temperature on corrosion inhibition efficiency (IE) of PVP–AMPS composite was studied for copper and brass in hydrochloric acid (HCl) solution. The IE increases with concentration and decreases with time and temperature. A change in cathodic and anodic Tafel slopes with the concentration of PVP–AMPS inhibitors was observed. The increase in IE with concentration was attributed to the solubility of PVP–AMPS composite in HCl. However, the decrease in IR with time and temperature was due to the desorption of PVP–AMPS composite from the surface of copper and brass and also due to the exothermic reactions at higher temperature. A few peaks in FTIR spectra at 3000–3100 cm−1 were missing, which is due to the stretching vibration of H–C during the crosslinking polymerization. Further, the absence of the O–H peak indicated that the polymerization process removed the water molecule. The best correlation coefficient (R2) for the Langmuir adsorption mechanism was achieved. A negative Gibbs free energy (ΔG) envisages the spontaneity of the adsorption process. However, the | ΔG| for adsorption was less than 20 kJmol−1 confirming the process as physisorption. A shift in anodic and cathodic branches in the presence of the PVP–AMPS inhibitor indicated a mixed-type inhibitor behavior.

Keywords



[1]    L. Feng, C. Yin, H. Zhang, Y. Li, X. Song, Q. Chen, and H. Liu, “Cationic gemini surfactants with a bipyridyl spacer as corrosion inhibitors for carbon steel,” ACS Omega, vol. 3, no. 12, pp. 18990–18999, Dec. 2018, doi: 10.1021/acsomega. 8b03043.

[2]    P. M. Niamien, H. A. Kouassi, A. Trokourey, F. K. Essy, D. Sissouma, and Y. Bokra, “Copper corrosion inhibition in 1 M HNO3 by two benzimidazole derivatives,” International Scholarly Research Notices, vol. 2012, pp. 1–15, 2012, doi: 10.5402/2012/623754.

[3]    T. L. Skovhus, R. B. Eckert, and E. Rodrigues, “Management and control of microbiologically influenced corrosion (MIC) in the oil and gas industry—Overview and a North Sea case study,” Journal of Biotechnology, vol. 256, pp. 31–45, 2017, doi: 10.1016/j.jbiotec.2017.07.003.

[4]    M. G. Tsoeunyane, M. E. Makhatha, and O. A. Arotiba, “Corrosion inhibition of mild steel by poly(butylene succinate)-L-histidine extended with 1,6-diisocynatohexane polymer composite in 1 M HCl,” International Journal of Corrosion, vol. 2019, 2019, doi: 10.1155/2019/7406409.

[5]    N. Mahato and M. M. Singh, “Investigation of passive film properties and pitting resistance of AISI 316 in aqueous ethanoic acid containing chloride ions using electrochemical impedance spectroscopy(EIS),” Portugaliae Electrochimica Acta, vol. 29, pp. 233–251, 2011, doi: 10.4152/ pea.201104233.

[6]    S. Ramesh, G. Anne, N. Bhat, G. Aithal, H. Shivananda Nayaka, and S. Arya, “Surface modification of multi-directional forged biodegradable Mg-Zn alloy by ball burnishing process: Modeling and analysis using deep neural network,” Journal of Manufacturing Processes, vol. 68, pp. 423–434, 2021, doi: 10.1016/j.jmapro.2021.05.049.

[7]    G. Anne, M. R. Ramesh, H. Shivananda Nayaka, S. B. Arya, and S. Sahu, “Microstructure evolution and mechanical and corrosion behavior of accumulative roll bonded Mg-2%Zn/Al-7075 multilayered composite,” Journal of Materials Engineering and Performance, vol. 26, no. 4, pp. 1726–1734, 2017, doi: 10.1007/ s11665-017-2576-z.

[8]    N. U. Shehu, U. I. Gaya, and A. A. Muhammad, “Influence of side chain on the inhibition of aluminium corrosion in HCl by α-amino acids,” Applied Science and Engineering Progress, vol. 12, no. 3, pp. 186–197, Aug. 2019, doi: 10.14416/ j.asep.2019.07.002.

[9]    O. Falodun and R. Loto, “Corrosion behavior of AA70 reinforced zea mays husk particle in NaCl/H2SO4 concentrations,” Applied Science and Engineering Progress, vol. 17, no. 1, Feb. 2024, Art. no. 6915, doi: 10.14416/j.asep. 2023.08.001.

[10]  M. Oki, A. A. Adediran, A. Ikechukwu, C. O. Onokohwomo, C. Bosa, S. A. Akintola, and O. S. Adesina, “Corrosion protection by novel conversion coatings on structural Al 6061,” Applied Science and Engineering Progress, vol. 16, no. 1, Nov. 2022, Art. no. 5806, doi: 10.14416/j.asep.2022.03.005.

[11]  S. Daopiset, N. Karnchanaprayut, N. Kiatsareekul, and T. Kongkrapan, “Effects of surface finishes on corrosion resistance of welded stainless steels,” Applied Science and Engineering Progress, vol. 3, no. 3, pp. 65–71, Sep. 2013.

[12]  A. S. Fouda, M. A. Ismael, R. M. Abo Shahba, L. A. Kamel, and A. A. El-Nagggar, “Corrosion inhibition of copper and α-brass in 1 M HNO3 solution using new arylpyrimido [5, 4-c] quinoline-2,4-dione derivative,” International Journal of Electrochemical Science, vol. 12,      no. 4, pp. 3361–3384, 2017, doi: 10.20964/ 2017.04.57.

[13]  L. Chen, D. Lu, and Y. Zhang, “Organic compounds as corrosion inhibitors for carbon steel in hcl solution: A comprehensive review,” Materials, vol. 15, no. 6, 2022, doi: 10.3390/ ma15062023.

[14]  W. Guo, C. Gao, Q. Li, Z. Cheng, and X. Qi, “Preparation of scale inhibitor by using the waste of refined 2-acrylamido-2-methylpropane sulfonic acid,” Environmental Progress & Sustainable Energy, vol. 35, no. 3, pp. 833–839, May 2016, doi: 10.1002/ep.12290.

[15]  A. Singh, M. Liu, E. Ituen, and Y. Lin, “Anti-corrosive properties of an effective guar gum grafted 2-Acrylamido-2-Methylpropanesulfonic acid (GG-AMPS) coating on copper in a 3.5% NaCl solution,” Coatings, vol. 10, no. 3, 2020, doi: 10.3390/coatings10030241.

[16]  L. A. Al Juhaiman, “Polyvinyl pyrrolidone as a corrosion inhibitor for carbon steel in HCl,” International Journal of Electrochemical Science, vol. 11, no. 3, pp. 2247–2262, 2016, doi: 10.1016/s1452-3981(23)16098-6.

[17]  Y. Chen and W. Yang, “Formulation of corrosion inhibitors,” in Water Chemistry, M. Eyvaz and E. Yüksel, Eds. Rijeka: IntechOpen, 2020, doi: 10.5772/intechopen.88533.

[18]  C. Zhichun, L. Jianzhong, Z. Zhiying, Y. Wenhu, and Q. Donghai, “Effects of addition of polyvinyl pyrrolidone (PVP) as a corrosion inhibitor to Zr/V-based conversion coating on aluminum alloy,” Chemical Papers, vol. 77, no. 10, pp. 5847–5857, 2023, doi: 10.1007/s11696-023-02902-4.

[19]  S. A. Umoren and E. E. Ebenso, “Blends of polyvinyl pyrrolidone and polyacrylamide as corrosion inhibitors for aluminium in acidic medium,” Indian Journal of Chemical Technology, vol. 15, no. 4, pp. 355–363, 2008.

[20]  R. Salim, E. Ech-chihbi, H. Oudda, F. El Hajjaji, M. Taleb, and S. Jodeh, “A review on the assessment of imidazo[1,2-a]pyridines as corrosion inhibitor of metals,” Journal of Bio- and Tribo-Corrosion, vol. 5, no. 1, pp. 1–9, 2019, doi: 10.1007/s40735-018-0207-3.

[21]  X. Wang, S. Liu, J. Yan, J. Zhang, Q. Zhang, and Y. Yan, “Recent progress of polymeric corrosion inhibitor: Structure and application,” Materials, vol. 16, no. 8, Apr. 2023, doi: 10.3390/ ma16082954.

[22]  S. A. Umoren, “Polymers as corrosion inhibitors for metals in different media- A review,” The Open Corrosion Journal, vol. 2, no. 1, pp. 175–188, 2009, doi: 10.2174/1876503300902010175.

[23]  A. F. Sabirneeza and S. Subhashini, “Synergistic influence of leucine on polyvinyl alcohol in the corrosion inhibition of mild steel in molar hydrochloric acid – taguchi method,” Research Journal of Chemical Sciences, vol. 43, no. 3, pp. 10–16, 2014, doi: 10.15764/ojces.2014.01007.

[24]  A. Ali Fathima Sabirneeza and S. Subhashini, “A novel water-soluble, conducting polymer composite for mild steel acid corrosion inhibition,” Journal of Applied Polymer Science, vol. 127, no. 4, pp. 3084–3092, Feb. 2013, doi: 10.1002/app.37661.

[25]  D. V. Ribeiro and J. C. C. Abrantes, “Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: A new approach,” Construction and Building Materials, vol. 111, pp. 98–104, 2016, doi: 10.1590/s1983-41952015000400007.

[26]  H. Jamshidi and A. Rabiee, “Synthesis and characterization of acrylamide-based anionic copolymer and investigation of solution properties,” Advances in Materials Science and Engineering, vol. 2014, p. 728675, 2014, doi: 10.1155/2014/728675.

[27]  R. P. Amelia, S. Gentile, W. F. Nirode, and L. Huang, “Quantitative analysis of copolymers and blends of polyvinyl acetate (PVAc) using fourier transform infrared spectroscopy (FTIR) and elemental analysis (EA),” World Journal of Chemical Education, vol. 4, no. 2, pp. 25–31, May 2016, doi: 10.12691/wjce-4-2-1.

[28]  A. Awadallah-F, S. Y. A. El-Wahab, and H. I. Al-Shafey, “Controlled synthesis and characterization of nanohydrogels formed from copolymer (2-acrylamido-2-methylpropane sulfonic acid/acrylamide),” e-Polymers, vol. 16, no. 3, pp. 207–215, 2016, doi: 10.1515/epoly-2015-0263.

[29]  A. M. Atta, R. A. M. El-Ghazawy, R. K. Farag, and S. M. Elsaeed, “Synthesis and characterization of pH-sensitive PAMPS/PVP nanogels in aqueous media,” Polymers for Advanced Technologies, vol. 22, no. 5, pp. 732–737, May 2011, doi: 10.1002/pat.1573.

[30]  J. Breton, “Fourier transform infrared spectroscopy of primary electron donors in type I photosynthetic reaction centers,” Biochimica et Biophysica Acta (BBA) - Bioenergetics, vol. 1507, no. 1, pp. 180–193, 2001, doi: 10.1016/S0005-2728(01)00206-7.

[31]  K. Chhouk, Wahyudiono, H. Kanda, S.-I. Kawasaki, and M. Goto, “Micronization of curcumin with biodegradable polymer by supercritical anti-solvent using micro swirl mixer,” Frontiers of Chemical Science and Engineering, vol. 12, no. 1, pp. 184–193, 2018, doi: 10.1007/s11705-017-1678-3.

[32]  D. Pathania and R. Sharma, “Synthesis and characterization of graft copolymers of methacrylic acid onto gelatinized potato starch using chromic acid initiator in presence of air,” Advanced Materials Letters, vol. 3, no. 2, pp. 136–142, 2012, doi: 10.5185/amlett.2011.8297.

[33]  R. K. Mishra, M. Datt, and A. K. Banthia, “Synthesis and characterization of pectin/PVP hydrogel membranes for drug delivery system,” AAPS PharmSciTech, vol. 9, no. 2, pp. 395–403, 2008, doi: 10.1208/s12249-008-9048-6.

[34]  R. Karthikaiselvi and S. Subhashini, “The water soluble composite poly(vinylpyrrolidone–methylaniline): A new class of corrosion inhibitors of mild steel in hydrochloric acid media,” Arabian Journal of Chemistry, vol. 10, no. 1, pp. S627–S635, 2017, doi: 10.1016/ j.arabjc.2012.10.024.

[35]  S. Xu, S. Zhang, L. Guo, L. Feng, and B. Tan, “Experimental and theoretical studies on the corrosion inhibition of carbon steel by two indazole derivatives in HCl medium,” Materials, vol. 12, no. 8, Art. no. 1339, Apr. 2019, doi: 10.3390/ma12081339.

[36]  M. H. Sliem, M. Afifi, A. Bahgat Radwan, E. M. Fayyad, M. F. Shibl, F. E.-T. Heakal, and A. M. Abdullah, “AEO7 surfactant as an eco-friendly corrosion inhibitor for carbon steel in HCl solution,” Scientific Reports, vol. 9, no. 1, Art. no. 2319, Feb. 2019, doi: 10.1038/s41598-018-37254-7.

[37]  P. Arockiasamy, X. Q. R. Sheela, G. Thenmozhi, M. Franco, J. W. Sahayaraj, and R. J. Santhi, “Evaluation of corrosion inhibition of mild steel in 1 M hydrochloric acid solution by mollugo cerviana,” International Journal of Corrosion, vol. 2014, 2014, Art. no. 679192, doi: 10.1155/ 2014/679192.

[38]  T. Vennila and P. Manjula, “Corrosion inhibition, Adsorption behaviour and thermokinetic characteristics of 1-Benzyl-3-Hydroxy-1-H-Indazole on mildsteel in neutral medium,” Indian Journal of Applied Research, vol. 6, no. 6, Jun. 2016.

[39]  H. Baeza, M. Guzmán, P. Ortega, and L. Vera, “Corrosion inhibition of copper in 0.5 m hydrochloric acid by 1,3,4-Thiadiazole-2,5-Dithiol,” Journal of the Chilean Chemical Society, vol. 48, no. 3, pp. 23–26, 2003, doi: 10.4067/S0717-97072003000300004.

[40]  M. E. Bakri, R. Touir, A. Tazouti, N. Dkhireche, M. E. Touhami, A. Rochdi, and A. Zarrouk, “Corrosion inhibition study of brass in simulated cooling water by triazole derivatives, cetyltrimethylammonium bromide and their mixture,” Arabian Journal for Science and Engineering, vol. 41, no. 1, pp. 75–88, 2016, doi: 10.1007/s13369-014-1532-6.

[41]  A. El-Sherbini, B. Khalil, C. Ismail, and D. Tobar, “The corrosion of copper metal in hcl solutions and the effect of molybdate and chromate,” in The International Conference on Aerospace Sciences and Aviation Technology, vol. 16, pp. 1–9, May 2015, doi: 10.21608/ asat.2015.22941.

[42]  Q. Liu, H. Luo, C. F. Dong, K. Xiao, and X. G. Li, “The electrochemical behaviour of brass in NaHSO3 solution without and with Cl-,” International Journal of Electrochemical Science, vol. 7, pp. 11123–11136, 2012.

[43]  A. K. Satpati and A. V. R. Reddy, “Electrochemical study on corrosion inhibition of copper in hydrochloric acid medium and the rotating ring-disc voltammetry for studying the dissolution,” International Journal of Electrochemistry, vol. 2011, pp. 1–8, 2011, doi: 10.4061/2011/173462.

[44]  M. A. Quraishi, E. E. Ebenso, and M. Natesan, “Inhibition of atmospheric corrosion of mild steel by new green inhibitors under vapour phase condition,” International Journal of Electrochemical Science, vol. 7, no. 8, pp. 7463–7475, 2012, doi: 10.1016/S1452-3981(23)15797-X.

[45]  T. Ramdé, S. Rossi, and L. Bonou, “Corrosion inhibition action of sulfamethoxazole for brass in acidic media,” International Journal of Electrochemical Science, vol. 11, no. 8, pp. 6819–6829, 2016, doi: 10.20964/2016.08.39.

[46]  R. T. Loto, C. A. Loto, and A. P. Popoola, “Inhibition effect of deanol on mild steel corrosion in dilute sulphuric acid,” South African Journal of Chemistry, vol. 68, pp. 105–114, 2015, doi: 10.17159/0379-4350/2015/v68a16.

[47]  N. Wei, Y. Jiang, Z. Liu, Y. Ying, X. Guo, Y. Wu, Y. Wen, and H. Yang, “4-Phenylpyrimidine monolayer protection of a copper surface from salt corrosion,” RSC Advances, vol. 8, no. 14, pp. 7340–7349, 2018, doi: 10.1039/C7RA12256J.

[51]  L. A. Al Juhaiman, A. A. Mustafa, and W. K. Mekhamer, “Polyvinyl pyrrolidone as a green corrosion inhibitor of carbon steel in neutral solutions containing NaCl : Electrochemical and thermodynamic study,” International Journal of Electrochemical Science, vol. 7, no. 9, pp. 8578–8596, 2012, doi: 10.1016/S1452-3981(23)18017-5.

[52]  J. Basumatary, “Cavitation erosion-corrosion in marine propeller materials,” Ph.D. dissertation, Faculty of Engineering and the Environment, University of Southampton, Southampton, England,  2017.

[53]  N. Devi and J. Sarma, “Blood compatible hydrogel composed of starch, 2-acrylamido-2-ethylpropane sulfonic acid and acrylamide,” International Journal of Latest Research in Science and Technology, vol. 3, no. 4, pp. 205–210, 2014.

[54]  M. Shaban, E. S. H. El Ashry, H. Abdel-Hamid, A. Morsy, and S. Kandil, “Anti-biofouling of 2-acrylamido-2-methylpropane sulfonic acid grafted cellulose acetate membranes used for water desalination,” Chemical Engineering and Processing - Process Intensification, vol. 149, 2020, Art. no. 107857, doi: 10.1016/j.cep. 2020.107857.

[55]  N. S. Al-Kadhi, A. E. Fotouh, Y. H. Kotp, F. A. Saad, R. K. Shah, and S. M. E. Rayes, “Utilization of polyvinylpyrrolidone as an organic template for the facile synthesis of analcime nanoparticles for efficient removal of Pb(II) and Cu(II) ions from aqueous media,” Silicon, vol. 16, no. 3, pp. 1387–1406, 2024, doi: 10.1007/s12633-023-02765-0.

[56]  W.-T. Kim, D.-C. Park, W.-H. Yang, C.-H. Cho, and W.-Y. Choi, “Effects of electrospinning parameters on the microstructure of PVP/TiO2 nanofibers,” Nanomaterials, vol. 11, no. 6, Art. no. 1616, 2021. doi: 10.3390/nano11061616.

[57]  S. Huang, Y. Liu, Y. Zhou, Q. Li, G. Ren, Q. Jing, and F. Ren, “Exploring the effect of PVP on the spherical agglomeration process and micromeritic properties of ascorbic acid,” Powder Technology, vol. 342, pp. 929–937, 2019, doi: 10.1016/j.powtec.2018.09.039.

[58]  M. Wittmann, K. Henze, K. Yan, V. Sharma, and J. Simmchen, “Rod-shaped microparticles — an overview of synthesis and properties,” Colloid and Polymer Science, vol. 301, no. 7, pp. 783–799, 2023, doi: 10.1007/s00396-023-05111-3.

[59]  P. L. Krapivsky and E. Ben‐Naim, “Collective properties of adsorption–desorption processes,” The Journal of Chemical Physics, vol. 100, no. 9, pp. 6778–6782, May 1994, doi: 10.1063/1.467037.

[60]  K. Dreisewerd, “The desorption process in MALDI,” Chemical Reviews, vol. 103, no. 2, 2003, doi: 10.1021/cr010375i.

[61]  W. Yang, Z. Liu, and H. Huang, “Galvanic corrosion behavior between AZ91D magnesium alloy and copper in distilled water,” Corrosion Science, vol. 188, 2021, Art. no. 109562, doi: 10.1016/j.corsci.2021.109562.

[62]  A. S. Ismail, “Corrosion behavior of aluminum-silicon-copper-manganese alloy in sulfuric acid medium,” Silicon, vol. 8, no. 2, pp. 211–216, 2016, doi: 10.1007/s12633-014-9226-y.

[63]  L. You-You, C. Tie-Shan, W. Dong-Ying, Z. Jie, B. Cui-Min, S. Yi-kun, M. Xian-Ming, and C. Cong-Qian, “Electrochemical corrosion of FV520B stainless steel in solutions bearing hydrogen bromide and acetic acid at high temperature from 130 to 200 °C,” Corrosion Engineering, Science and Technology, vol. 56, no. 7, pp. 639–647, Oct. 2021, doi: 10.1080/1478422X.2021.1933309.

[64]  A. Dąbrowski, “Adsorption — from theory to practice,” Advances in Colloid and Interface Science, vol. 93, no. 1, pp. 135–224, 2001, doi: 10.1016/S0001-8686(00)00082-8.

[65]  A. Kuroki, M. Hiroto, Y. Urushihara, T. Horikawa, K. I. Sotowa, and J. R. Alcántara Avila, “Adsorption mechanism of metal ions on activated carbon,” Adsorption, vol. 25, no. 6, pp. 1251–1258, 2019, doi: 10.1007/s10450-019-00069-7.

Full Text: PDF

DOI: 10.14416/j.asep.2024.07.013

Refbacks

  • There are currently no refbacks.


Copyright © 2022 by King Mongkut’s University of Technology North Bangkok. All rights reserved.