Page Header

การศึกษาเบื้องต้นถึงผลกระทบของแผ่นวิสโคอีลาสติกพอลิเมอร์ต่อคุณสมบัติด้านการสั่นสะเทือนและเสียงของแผ่นคอนกรีตหล่อสำเร็จ
Preliminary Study on Effects of Viscoelastic Polymer on Damping and Sound Properties of Concrete Panels

Jirawin Sanguansin, Phattharachai Pongsopha, Piti Sukontasukkul, Khemapat Tontiwattanakul

Abstract


ปัญหามลพิษทางเสียงภายในที่พักอาศัยเป็นหนึ่งในปัญหาสำคัญที่ต้องได้รับการแก้ไขสำหรับอาคารสูงในประเทศไทย ในปัจจุบันอาคารโดยส่วนมากก่อสร้างด้วยระบบผนังคอนกรีตสำเร็จรูปที่มีผิวเรียบและมีความหนาแน่นสูง ทำให้เกิดการสะท้อนของเสียงที่สูง รวมถึงการที่ใช้ผนังภายในที่บางทำให้เกิดการส่งผ่านของเสียงจากภายนอกและระหว่างห้องได้ งานวิจัยนี้เป็นการพัฒนาผนังวัสดุประกอบกันเสียง โดยนำวัสดุวิสโคอีลาสติกพอลิเมอร์ ซึ่งเป็นวัสดุหน่วง มีความสามารถในการดูดซับและสลายการสั่นสะเทือนได้ดี โดยคาดหวังว่าเมื่อนำวัสดุวิสโคอีลาสติกพอลิเมอร์ มาติดตั้งภายในแผ่นคอนกรีตจะสามารถลดการสั่นสะเทือนของผนังได้และอาจนำไปสู่การปรับปรุงสมรรถนะทางเสียงด้วยเช่นกัน โดยผลการทดลองที่นำเสนอในบทความนี้เป็นผลการทดลองเบื้องต้นประกอบไปด้วย การวัดค่าการอัตราการหน่วงการสั่นของแผ่นคอนกรีตที่ติดด้วยแผ่นวัสดุวิสโคอีลาสติกพอลิเมอร์ในรูปแบบต่างๆ และคุณสมบัติพื้นฐานอื่นๆ เช่น ค่ากำลังรับแรงอัด ความหนาแน่น และค่าการดูดซึมน้ำ

Sound pollution in buildings is one of problems that need to be addressed for high-rise buildings in Thailand. In present, most high-rise buildings are constructed with flat and dense precast concrete panel systems which can cause high reflection of sound and also, the use of thin walls allows sound to transmit from outside to inside and in between the rooms. This study aims to develop composite concrete panels with better sound insulation using viscoelastic polymer film. The viscoelastic polymer film is a material known to have high damping property, and good ability to absorb and dissipates vibrations. It is expected that by installing VPF material in concrete panel, the vibration induced by sound can be reduced and which may lead to an improvement in sound properties. The results showed in this paper are preliminary results consisted of the measurement of vibration of concrete panel attached with VPF at different patterns and other basic properties such as compressive strength, density and water absorption.


Keywords



[1] N. G. McCrum, C. P. Buckley, and C. B. Bucknell, Principles of Polymer Engineering, Oxford University Pass Inc., pp.117–176, 2003.

[2] F. Goran, Viscoelastic damping technology can achieve 70% noise reduction, Off-shore magazine, 2000.

[3] R. D. Mohan, “Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes,” Journal of Sound and Vibration, vol. 262, no. 3, pp. 457–474, 2003.

[4] K. S. Lee, J. I. Choi, S. K. Kim, B. K. Lee, J. S. Hwang, and B. Y. Lee, “Damping and mechanical properties of composite composed of polyurethane matrix and preplaced aggregates,” Construction and Building Materials, vol. 145, pp. 68–75, 2017.

[5] K. S. Lee, J. I. Choi, S. E. Park, J. S. Hwang, and B.Y. Lee, “Damping property of prepacked concrete incorporating coarse aggregates coated with polyurethane,” Cement and Concrete Composites, vol. 93, pp. 301–308, 2018.

[6] L. Marshall, Architectural Acoustics. Elsevier Academic Press, 2006.

[7] R. D. Blevins, Formulas for natural frequency and mode shape. Van Norstrand, 2001.

[8] R. del Rey, J. Alba, L. Bertó, and A. Gregori, “Smallsized reverberation chamber for the measurement of sound absorption,” Materiales de Construcción, vol. 67, no. 328, e139, 2017.

Full Text: PDF

DOI: 10.14416/j.kmutnb.2020.10.001

ISSN: 2985-2145