Page Header Logo Applied Science and Engineering Progress

Valorization of Corn Husk Agricultural Waste into Particleboard Using Citric Acid Adhesive: Effects of Density, Thickness, and Binder Volume

Kurnia Wiji Prasetiyo, Lilik Astari, Ignasia Maria Sulastiningsih, Dian Anggraini Indrawan, Bambang Subiyanto, Kardiman Kardiman, Rizal Hanifi, Mersi Kurniati

Abstract


The valorization of agricultural residues presents an eco-friendly solution to mitigate biomass waste and reduce deforestation. This study investigates the physical, mechanical, thermal, and acoustic properties of particleboard manufactured from corn husk using citric acid as a natural binder. The effects of three key variables board density (0.6 and 0.8 g/cm³), thickness (0.6 and 1 cm), and citric acid content (20%, 25%, and 30%) were systematically analyzed. The novelty of this study lies in the integrated evaluation of board density, thickness, and citric acid content across 12 corn-husk particleboard formulations and their simultaneous effects on physical, mechanical, thermal, and acoustic performance under the same manufacturing conditions. Particleboards were fabricated via hot pressing at 180°C and 15 MPa for 12 minutes. Comprehensive characterization was performed based on JIS A 5908:2003 and ISO 11654:1997, including actual density, thickness swelling, modulus of rupture (MOR), modulus of elasticity (MOE), thermal conductivity, and sound absorption coefficient. Results indicate that higher density and binder content improve mechanical strength and reduce water uptake but may compromise porosity and acoustic absorption. The results revealed trade-offs among the evaluated properties: higher-density boards generally exhibited better mechanical performance, whereas lower-density boards provided lower thermal conductivity and better sound absorption under specific thickness conditions. Therefore, no single formulation was identified as optimal for all evaluated responses. The results demonstrate the potential of corn husk and citric acid for developing bio-based panels; however, further improvement in dimensional stability is required before their use in furniture or building applications.


Keywords



[1] J. Kawalerczyk et al., “Propolis extract as a bio-based modifier of urea-formaldehyde adhesive in particleboard production,” European Journal of Wood and Wood Products, vol. 83, 2025, Art. no. 84, doi: 10.1007/s00107-025-02242-y.

[2] P. W. Olupot, E. Menya, F. Lubwama, L. Ssekaluvu, B. Nabuuma, and J. Wakatuntu, “Effects of sawdust and adhesive type on the properties of rice husk particleboards,” Results in Engineering, vol. 16, Dec. 2022, Art. no. 100775, doi: 10.1016/j.rineng.2022.100775.

[3] A. Jain, D. Rastogi, B. Chanana, M. S. Parmar, and A. Dhama, “Extraction of cornhusk fibres for textile usages,” IOSR Journal of Polymer and Textile Engineering, vol. 4, no. 1, 2017, pp. 29–34, doi: 10.9790/019X-04012934.

[4] K. W. Prasetiyo, L. Zalukhu, L. Astari, Sudarmanto, F. Akbar, and D. Hermawan, “The potential of using agricultural waste: Corn husk for particleboard raw material,” in Conference Series: Earth and Environmental Science, vol. 591, 2020, Art. no. 012011, doi: 10.1088/1755-1315/591/1/012011.

[5] L. Astari, R. H. Crawford, K. Umemura, B. Ozarska, and B. Belleville, “Life cycle analysis of particleboard made of corn stalk and citric acid at laboratory scale,” Applied Sciences, vol. 15, no. 17, 2025, Art. no. 9705, doi: 10.3390/app15179705.

[6] N. Singh, A. Rana, and G. K. Badhotiya, “Adhesive systems used for particleboards manufacturing - Review,” in AIP Conference Proceedings, vol. 2521, no. 1, May 2023, Art. no. 020021, doi: 10.1063/5.0113158.

[7] P. Boruszewski, P. Borysiuk, A. Jankowska, and J. Pazik, “Low-density particleboards modified with expanded and unexpanded fillers—Characteristics and properties,” Materials, vol. 15, no. 13, 2022, Art. no. 4430, doi: 10.3390/ma15134430.

[8] F. M. S. Brito, G. B. Júnior, J. B. Paes, U. L. Belini, and M. Tomazello-Filho, “Technological characterization of particleboards made with sugarcane bagasse and bamboo culm particles,” Construction and Building Materials, vol. 262, Nov. 2020, Art. no. 120501, doi: 10.1016/j.conbuildmat.2020.120501.

[9] J. Fehrmann, B. Belleville, B. Ozarska, M. Ismayati, and W. Dwianto, “Effects of mat composition and pressing time on citric acid-bonded ultra-low-density hemp hurd particleboard,” Industrial Crops and Products, vol. 210, Apr. 2024, Art. no. 118070, doi: 10.1016/j.indcrop.2024.118070.

[10] J. A. Suba and S. K. Boominathan, “Acoustic, mechanical and thermal properties of luffa/jute fiber-reinforced bio-composites,” Applied Science and Engineering Progress, vol. 17, no. 4, 2024, Art. no. 7526, doi: 10.14416/j.asep.2024.08.006.

[11] M. Pędzik, R. Auriga, L. Kristak, P. Antov, and T. Rogoziński, “Physical and mechanical properties of particleboard produced with addition of walnut (Juglans regia L.) wood residues,” Materials, vol. 15, no. 4, 2022, Art. no. 1280, doi: 10.3390/ma15041280.

[12] M. Bovo et al., “Contribution to thermal and acoustic characterization of corn cob for bio-based building insulation applications,” Energy and Buildings, vol. 262, May 2022, Art. no. 111994, doi: 10.1016/j.enbuild.2022.111994.

[13] F. D. García et al., “Novel adhesive based on black soldier fly larvae flour for particleboard production,” Construction and Building Materials, vol. 411, Jan. 2024, Art. no. 134758, doi: 10.1016/j.conbuildmat.2023.134758.

[14] R. Ye et al., “A facile strategy to fabricate low viscosity and high cold tack soy protein-based adhesive for particleboard production,” Industrial Crops and Products, vol. 214, Aug. 2024, Art. no. 118612, doi: 10.1016/j.indcrop.2024.118612.

[15] T. Karliati et al., “Performance of particleboard made of agroforestry residues bonded with thermosetting adhesive derived from waste styrofoam,” Polymers, vol. 16, no. 4, 2024, Art. no. 543, doi: 10.3390/polym16040543.

[16] Y. Khrissi, A. Tilioua, N. Laaroussi, and A. Bybi, “Innovative bio-composites based on gypsum and date palm fibers: investigation of thermal, acoustic and mechanical properties for ecological construction,” Journal of Building Engineering, vol. 111, Oct. 2025, Art. no. 113486, doi: 10.1016/j.jobe.2025.113486.

[17] J. Liu et al., “Valorization of agricultural residues: Challenges and opportunities in the production of bio-based materials,” Bioresources, vol. 20, no. 2, pp. 4798-4820, 2025, doi: 10.15376/biores.20.2.Liu.

[18] J. Zhang, S. Luo, L. Gao, L. Chang, and W. Guo, “Utilizing agricultural residue peanut husk in the manufacture of particleboard using foamable polyurethane adhesive,” Polymer Composites, vol. 47, no. 5, Mar. 2026, pp. 4609–4623, doi: 10.1002/pc.70449.

[19] I. Svensson, A. Butron, M. Puyadena, A. González, L. Irusta, and A. Barrio, “Bio-Based phosphate-containing polyester for improvement of fire reaction in wooden particleboard,” Polymers, vol. 15, no. 5, 2023, Art. no. 1093, doi: 10.3390/polym15051093.

[20] A. Scharf, D. Sandberg, and D. Jones, “The influence of chemical content and pressing temperature on the properties of citric acid-bonded particleboards from softwood sawmilling residues,” Wood Material Science & Engineering, vol. 19, no. 4, pp. 987-992, 2024, doi: 10.1080/17480272.2024.2367608.

[21] W. Hidayat et al., “Performance of eco‐friendly particleboard from agro‐industrial residues bonded with formaldehyde‐free natural rubber latex adhesive for interior applications,” Polymer Composites, vol. 43, no. 4, pp. 2222–2233, Apr. 2022, doi: 10.1002/pc.26535.

[22] D. Morasilp, T. Sangkakool, A. Sawatdiraksa, and Z. A. Jumani, “Characterisation of thermal, mechanical, and acoustic properties of industrial particleboard from non-food agricultural by-products: durian and mangosteen peels,” Journal of the Indian Academy of Wood Science, vol. 22, pp. 284–292, Dec. 2025, doi: 10.1007/s13196-025-00382-5.

[23] K. W. Prasetiyo et al., “The performance of corn husk particleboard as insulation material: The effect of varied particleboard densities,” Engineering, Technology & Applied Science Research, vol. 15, no. 4, pp. 25055–25060, Aug. 2025, doi: 10.48084/etasr.11512.

[24] S. Rosa Latapie, M. Lagouin, V. Sabathier, and A. Abou-Chakra, “From aggregate to particleboard: A new multi-scale model approach to thermal conductivity in bio-based materials,” Journal of Building Engineering, vol. 78, Nov. 2023, Art. no. 107664, doi: 10.1016/j.jobe.2023.107664.

[25] L. Kopač, A. Scharf, C. Lin, D. Sandberg, S. Medved, and D. Jones, “Investigation into a bio-based adhesive in combination with fire retardants for particleboard manufacture,” Wood Material Science & Engineering, vol. 20, no. 1, pp. 236–238, 2025, doi: 10.1080/17480272.2024.2421931.

[26] J. A. Krumins, I. Vamza, A. Dzalbs, and D. Blumberga, “Particle boards from forest residues and bio-based adhesive,” Buildings, vol. 14, no. 2, 2024, Art. no. 462, doi: 10.3390/buildings14020462.

[27] K. Zvirgzds, E. Kirilovs, S. Kukle, I. Zotova, I. Gudro, and U. Gross, “Particleboard creation from agricultural waste residue of seed hemp,” Materials, vol. 16, no. 15, 2023, Art. no. 5316, doi: 10.3390/ma16155316.

[28] R. A. Fernandes, S. Lopes, N. Ferreira, J. Santos, J. M. Martins, and L. H. Carvalho, “Binderless particleboards obtained 100% from winery by-products for the packaging industry,” Frontiers in Food Science and Technology, vol. 4, 2024, Art. no. 1376415, doi: 10.3389/frfst.2024.1376415.

[29] M. Chen, S. Zheng, J. Wu, and J. Xu, “Study on preparation of high-performance binderless board from Broussonetia papyrifera,” Journal of Wood Science, vol. 69, 2023, Art. no. 17, doi: 10.1186/s10086-023-02092-3.

[30] P. Luo, C. Yang, Y. He, and T. Wang, “Use of scrap particleboard to produce recycled particleboard,” Bioresources, vol. 19, no. 2, pp. 3837–3844, 2024, doi: 10.15376/biores.19.2.3837-3844.

[31] L. Astari et al., “Performance of self-binding engineered panels made from sweet corn stalks (Zea mays L.) for furniture applications,” Bioresource Technology Reports, vol. 25, Feb. 2024, Art. no. 101802, doi: 10.1016/j.biteb.2024.101802.

[32] W. N. A. Wan Nadhari, M. Danish, S. N. A. B. Abdullah, A. M. Alanazi, N. A. Karim, and A. Mustapha, “Effect of potato starch on surface characteristics, mechanical, physical, and chemical binding mechanism of kenaf binderless particleboard,” Industrial Crops and Products, vol. 212, Jun. 2024, Art. no. 118300, doi: 10.1016/j.indcrop.2024.118300.

[33] J. Bauta, G. Vaca-Medina, C. Delgado Raynaud, V. Simon, V. Vandenbossche, and A. Rouilly, “Development of a binderless particleboard from brown seaweed sargassum spp.,” Materials, vol. 17, no. 3, 2024, Art. no. 539, doi: 10.3390/ma17030539.

[34] R. Fu, M. Guan, G. Wang, L. Pan, and Y. Li, “Optimised fermentation of bamboo waste using three types lactic acid bacteria and forming mechanism of binderless particleboard,” Industrial Crops and Products, vol. 196, Jun. 2023, Art. no. 116522, doi: 10.1016/j.indcrop.2023.116522.

[35] S. H. Lee et al., “Particleboard from agricultural biomass and recycled wood waste: a review,” Journal of Materials Research and Technology, vol. 20, pp. 4630–4658, 2022, doi: 10.1016/j.jmrt.2022.08.166.

[36] I. P. Nitu, S. Rahman, Md. N. Islam, Md. Ashaduzzaman, and Md. I. Shams, “Properties of jute stick binderless particleboard reinforced with bagasse pith,” Journal of the Indian Academy of Wood Science, vol. 19, pp. 16–22, Jun. 2022, doi: 10.1007/s13196-022-00293-9.

[37] S. Saad et al., “Feasibility of bio-based molasses and citric acid for the manufacturing of oil palm frond particleboard,” Bioresources, vol. 20, no. 2, pp. 2656–2669, 2025, doi: 10.15376/biores.20.2.2656-2669.

[38] I. P. Nitu, S. Rahman, Md. N. Islam, Md. Ashaduzzaman, and Md. I. Shams, “Preparation and properties of jute stick particleboard using citric acid–glycerol mixture as a natural binder,” Journal of Wood Science, vol. 68, 2022, Art. no. 30, doi: 10.1186/s10086-022-02039-0.

[39] R. Tampubolon, E. Sribudiani, S. Somadona, Y. Amin, and S. S. Kusumah, “Characteristics of particleboard from sorghum and nypa fruit skin fiber bonded with citric acid-sucrose adhesive,” Jurnal Sylva Lestari, vol. 10, no. 3, pp. 426–438, Sep. 2022, doi: 10.23960/jsl.v10i3.574.

[40] G. K. Dewi, R. Dwiyanna, V. A. Qibtiya, and R. Widyorini, “Physical and mechanical properties of salacca frond particleboard bonded with expired citric acid binder,” Journal of Tropical Forest Science, vol. 37, no. 4, pp. 427–439, 2025, doi: 10.26525/jtfs2025.37.4.427.

[41] R. A. Ramli et al., “Improving mechanical and physical properties of citric acid-bonded kenaf particleboard with gelatinized starch,” Journal of the Indian Academy of Wood Science, vol. 23, pp. 71–80, Jun. 2026, doi: 10.1007/s13196-025-00392-3.

[42] S. S. A. Muhaimin, N. I. Saharudin, A. F. Nongman, and N. Saari, “Characterization of bamboo particleboard bonded with Nelumbo nucifera seed starch-citric acid-based adhesive,” International Journal of Adhesion and Adhesives, vol. 138, Mar. 2025, Art. no. 103937, doi: 10.1016/j.ijadhadh.2025.103937.

[43] E. N. Yunira, R. N. Komariah, D. Subara, M. H. A. Nur, and R. A. Murda, “Characterization of particleboard form sisal using citric acid and sucrose as adhesive,” E3S Web of Conferences, vol. 691, 2026, Art. no. 02006, doi: 10.1051/e3sconf/202669102006.

[44] M. T. Ferrandez-García, A. Ferrandez-Garcia, T. Garcia-Ortuño, C. E. Ferrandez-Garcia, and M. Ferrandez-Villena, “Assessment of the physical, mechanical and acoustic properties of Arundo donax L. biomass in low pressure and temperature particleboards,” Polymers, vol. 12, no. 6, 2020, Art. no. 1361, doi: 10.3390/polym12061361.

[45] D. Cheng, H. Ding, B. Xu, and T. Li, “Suitability of thermally modified wood for binderless particleboard production: Effects of temperature and moisture content in hot pressing,” Industrial Crops and Products, vol. 221, Dec. 2024, Art. no. 119376, doi: 10.1016/j.indcrop.2024.119376.

[46] M. Rajinipriya, M. Nagalakshmaiah, M. Robert, and S. Elkoun, “Importance of agricultural and industrial waste in the field of nanocellulose and recent industrial developments of wood based nanocellulose: A review,” ACS Sustainable Chemistry & Engineering, vol. 6, no. 3, pp. 2807–2828, Mar. 2018, doi: 10.1021/acssuschemeng.7b03437.

[47] R. R. de Melo, D. M. Stangerlin, R. R. C. Santana, and T. D. Pedrosa, “Physical and mechanical properties of particleboard manufactured from wood, bamboo and rice husk,” Materials Research, vol. 17, no. 3, pp. 682–686, Jun. 2014, doi: 10.1590/S1516-14392014005000052.

[48] M. D. Ghalehno, M. Nazerian, and A. Bayatkashkoli, “Experimental particleboard from bagasse and industrial wood particles,” International Journal of Agriculture and Crop Sciences, vol. 5, no. 15, pp. 1626–1631, 2013.

[49] Japanese Standards Association, JIS A 5908: Particleboards, 2003.

[50] M. M. R. Maraghi, A. Tabei, and M. Madanipoor, “Effect of board density, resin percentage and pressing temperature on particleboard properties made from mixing of poplar wood slab, citrus branches and twigs of beech,” Wood Research, vol. 63, no. 4, pp. 669–682, 2018.

[51] J. T. de L. Bazzetto, G. B. Junior, and F. M. S. Brito, “Effect of particle size on bamboo particle board properties,” Floresta e Ambiente, vol. 26, no. 2, 2019, Art. no. e20170125, doi: 10.1590/2179-8087.012517.

[52] Z. Pásztory, Z. Börcsök, and D. Tsalagkas, “Density optimization for the manufacturing of bark-based thermal insulation panels,” in IOP Conference Series: Earth and Environmental Science, vol. 307, 2019, Art. no. 012007, doi: 10.1088/1755-1315/307/1/012007.

[53] M. Ferrandez-Villena, A. Ferrandez-Garcia, T. Garcia-Ortuño, and M. T. Ferrandez-Garcia, “Acoustic and thermal properties of particleboards made from mulberry wood (Morus alba L.) pruning residues,” Agronomy, vol. 12, no. 8, 2022, Art. no. 1803, doi: 10.3390/agronomy12081803.

[54] A. Andini, S. Bonnet, P. Rousset, and U. Hasanudin, “Impact of open burning of crop residues on air pollution and climate change in Indonesia,” Current Science, vol. 115, no. 12, pp. 2259–2266, Dec. 2018, doi: 10.18520/cs/v115/i12/2259-2266.

[55] L. Karlinasari et al., “Acoustical properties of particleboards made from betung bamboo (Dendrocalamus asper) as building construction material,” Bioresources, vol. 7, no. 4, pp. 5700–5709, 2012, doi: 10.15376/biores.7.4.5700-5709.

[56] M. L. M. Pacheco, F. C. Mejía, Y. R. Lazcano, A. A. Negrete, A. M. Ocampo, and J. M. C. de la Cruz, “Determination of the sound absorption capacity of hydraulic concrete mixtures added with waste tire rubber,” Journal of Minerals and Materials Characterization and Engineering, vol. 11, no. 5, pp. 197–211, Sep. 2023, doi: 10.4236/jmmce.2023.115015.

[57] A. Khatiri, A. Shalbafan, and S. Kazemi Najafi, “Development of straw particleboard using citric acid as bio-based adhesive,” Maderas. Ciencia y Tecnología, vol. 28, 2026, Art. no. e2326, doi: 10.22320/s0718221x/2026.23.

[58] L. Sekaluvu, P. Tumutegyereize, and N. Kiggundu, “Investigation of factors affecting the production and properties of maize cob-particleboards,” Waste and Biomass Valorization, vol. 5, pp. 27–32, Feb. 2014, doi: 10.1007/s12649-013-9228-9.

[59] B. T. Samuel, M. Barburski, E. Witczak, and I. Jasińska, “The influence of physical properties and increasing woven fabric layers on the noise absorption capacity,” Materials, vol. 14, no. 20, 2021, Art. no. 6220, doi: 10.3390/ma14206220.

[60] S. K. Sharma, S. R. Shukla, and A. K. Sethy, “Acoustical behaviour of natural fibres-based composite boards as sound-absorbing materials,” Journal of the Indian Academy of Wood Science, vol. 17, pp. 66–72, Jun. 2020, doi: 10.1007/s13196-020-00255-z.

[61] T. Hassan et al., “Acoustic, mechanical and thermal properties of green composites reinforced with natural fibers waste,” Polymers, vol. 12, no. 3, 2020, Art. no. 654, doi: 10.3390/polym12030654.

[62] B. Ndazi, J. V. Tesha, S. Karlsson, and E. T. N. Bisanda, “Production of rice husks composites with Acacia mimosa tannin-based resin,” Journal of Materials Science, vol. 41, pp. 6978–6983, Nov. 2006, doi: 10.1007/s10853-006-0220-7.

[63] W. Liu, F. Zhang, L. Dong, H. Wang, Z. An, and G. Zhang, “Recent advances in thermal resistance model: Theories, models and engineering applications,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 239, no. 13, pp. 5209–5239, 2025, doi: 10.1177/09544062251326806.

[64] K. Kobiela-Mendrek, M. Bączek, J. Broda, M. Rom, I. Espelien, and I. Klepp, “Acoustic performance of sound absorbing materials produced from wool of local mountain sheep,” Materials, vol. 15, no. 9, 2022, Art. no. 3139, doi: 10.3390/ma15093139.

[65] N. H. Sari, I. N. G. Wardana, Y. S. Irawan, and E. Siswanto, “Characterization of the chemical, physical, and mechanical properties of NaOH-treated natural cellulosic fibers from corn husks,” Journal of Natural Fibers, vol. 15, no. 4, pp. 545–558, 2018, doi: 10.1080/15440478.2017.1349707.

[66] A. S. Ratna, A. Ghosh, and S. Mukhopadhyay, “Advances and prospects of corn husk as a sustainable material in composites and other technical applications,” Journal of Cleaner Production, vol. 371, Oct. 2022, Art. no. 133563, doi: 10.1016/j.jclepro.2022.133563.

[67] F. O. Tarigan et al., “Development and characterization of novel hybrid particleboard made from several non-wood lignocellulosic materials,” Polymers, vol. 17, no. 4, 2025, Art. no. 512, doi: 10.3390/polym17040512.

[68] S. Ndikumana, O. Tanane, Y. Aichi, E. F. Latifa, and L. Goudali, “Innovative applications of sugarcane bagasse in the global sugarcane industry,” Processes, vol. 13, no. 12, 2025, Art. no. 3796, doi: 10.3390/pr13123796.

[69] S. M. Hosseini and M. Fadaei, “Properties of particleboard made from UF with low-formaldehyde (E1),” International Journal of Engineering, Transactions A: Basics, vol. 26, no. 1, pp. 45–50, Jan. 2013, doi: 10.5829/idosi.ije.2013.26.01a.07.

[70] L. Vidil, J. Fiorelli, K. Bilba, C. Onsippe, M.-A. Arsne, and H. Savastano, “Thermal insulating particle boards reinforced with coconut leaf sheaths,” Green Materials, vol. 4, no. 1, pp. 31–40, Apr. 2016, doi: 10.1680/jgrma.15.00029.

[71] A. Lamichhane, A. K. Vasudevan, M. Mohammadabadi, K. Ragon, J. Street, and R. D. Seale, “From crop residue to corrugated core sandwich panels as a building material,” Materials, vol. 18, no. 1, 2025, Art. no. 31, doi: 10.3390/ma18010031.

[72] K. Umemura, O. Sugihara, and S. Kawai, “Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard II: Effects of board density and pressing temperature,” Journal of Wood Science, vol. 61, pp. 40–44, Feb. 2015, doi: 10.1007/s10086-014-1437-8.

[73] M. Nasir et al., “Recent development in binderless fiber-board fabrication from agricultural residues: A review,” Construction and Building Materials, vol. 211, pp. 502–516, Jun. 2019, doi: 10.1016/j.conbuildmat.2019.03.279.

[74] N. Saropas, P. Huijisut, S. Noratad, S. Supansomboon, P. Wanakamol, and S. Supansomboon, “Mechanical and physical properties of binderless particleboard from rice straw and banana pseudostem,” Current Applied Science and Technology, vol. 25, no. 1, 2025, Art. no. e0262175, doi: 10.55003/cast.2024.262175.

[75] S. S. Kusumah, K. Umemura, I. Guswenrivo, T. Yoshimura, and K. Kanayama, “Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard II: Influences of pressing temperature and time on particleboard properties,” Journal of Wood Science, vol. 63, pp. 161–172, Apr. 2017, doi: 10.1007/s10086-016-1605-0.

[76] R. Widyorini, K. Umemura, A. Septiano, D. Soraya, G. Dewi, and W. Nugroho, “Manufacture and properties of citric acid-bonded composite board made from salacca frond: Effects of maltodextrin addition, pressing temperature, and pressing method,” Bioresources, vol. 13, no. 4, pp. 8662–8676, 2018, doi: 10.15376/biores.13.4.8662-8676.

[77] D. Dukarska, T. Rogoziński, P. Antov, L. Kristak, and J. Kmieciak, “Characterisation of wood particles used in the particleboard production as a function of their moisture content,” Materials, vol. 15, no. 1, 2022, Art. no. 48, doi: 10.3390/ma15010048.

[78] J. Fehrmann, B. Belleville, and B. Ozarska, “Effects of particle dimension and constituent proportions on internal bond strength of ultra-low-density hemp hurd particleboard,” Forests, vol. 13, no. 11, 2022, Art. no. 1967, doi: 10.3390/f13111967.

[79] N. Engehausen, J. T. Benthien, and J. Lüdtke, “Influence of particle size on the mechanical properties of single-layer particleboards,” Fibers, vol. 12, no. 4, 2024, Art. no. 32, doi: 10.3390/fib12040032.

[80] R. Magalhães et al., “Effect of panel moisture content on internal bond strength and thickness swelling of medium density fiberboard,” Polymers, vol. 13, no. 1, 2021, Art. no. 114, doi: 10.3390/polym13010114.

Full Text: PDF

DOI: 10.14416/j.asep.2026.11.007

Refbacks

  • There are currently no refbacks.