Page Header

A Perspective on the Potential Material Candidate for Railway Sector Applications: PVA Based Functionalized Graphene Reinforced Composite

Akarsh Verma


In this perspective article, the advantages offered by the biodegradable poly(vinyl alcohol) polymer matrix with 2D graphene nano-particles (in the functionalized form) for the innovation of new materials are showcased. Functionalization induces strong covalent bonding on the surface of graphene sheets when heaped in between the polymer matrix; on the other hand, no functionalization holds only the relatively weak van der Waals forces. This bonding type difference in conjunction with the ultrahigh tensile strength of graphene nanosheet makes it a suitable candidate for bearing higher loads, and it has been proposed here to use this innovative material in the railway sector application. Many research articles have been discussed here to understand the chemical mechanisms, as well as a thorough literature review, has been conducted for the same.


[1] W. Ferdous, A. Manalo, G. V. Erp, T. Aravinthan, S. Kaewunruen, and A. Remennikov, “Composite railway sleepers–Recent developments, challenges and future prospects,” Composite Structures, vol. 134, pp. 158–168, 2015.

[2] S. Xie and H. Zhou, “Impact characteristics of a composite energy absorbing bearing structure for railway vehicles,” Composites Part B: Engineering, vol. 67, pp. 455–463, 2014.

[3] W. Ferdous, A. Manalo, O. AlAjarmeh, A. A. Mohammed, C. Salih, P. Yu, M. M. Khotbehsara, and P. Schubel, “Static behaviour of glass fibre reinforced novel composite sleepers for mainline railway track,” Engineering Structures, vol. 229, 2021, Art. no. 111627.

[4] V. A. N. Gerard and M. Mckay, “Recent Australian developments in fibre composite railway sleepers,” Electronic Journal of Structural Engineering, vol. 13, pp. 62–66, 2013.

[5] B. Z. Jang, Advanced Polymer Composites: Principles and Applications. Boca Raton: CRC Press, 1994.

[6] N. Limpan, T. Prodpran, S. Benjakul, and S. Prasarpran, “Properties of biodegradable blend films based on fish myofibrillar protein and polyvinyl alcohol as influenced by blend composition and pH level,” Journal of Food Engineering, vol. 100, pp. 85–92, 2010.

[7] Q. Cheng, S. Wang, T. G. Rials, and S. H. Lee, “Physical and mechanical properties of polyvinyl alcohol and polypropylene composite materials reinforced with fibril aggregates isolated from regenerated cellulose fibers,” Cellulose, vol. 14, pp. 593–602, 2007.

[8] V. K. Thakur and A. S. Singha, Biomass-based Biocomposites. Ohio: SmithersRapra, 2013.

[9] V. K. Thakur, Green Composites from Natural Resources. Florida: CRC Press, 2013.

[10] A. Berghezan, “Non-ferrous materials,” Nucleus, vol. 8, pp. 5–11, 1966.

[11] Z. W. Abdullah, Y. Dong, I. J. Davies, and S. Barbhuiya, “PVA, PVA blends, and their nanocomposites for biodegradable packaging application,” Polymer-Plastics Technology and Engineering, vol. 56, pp. 1307–1344, 2017.

[12] I. Saini, A. Sharma, R. Dhiman, S. Aggarwal, S. Ram, and P. K. Sharma, “Grafted SiC nanocrystals: For enhanced optical, electrical and mechanical properties of polyvinyl alcohol,” Journal of Alloys and Compounds, vol. 714, pp. 172–180, 2017.

[13] E. Marin, J. Rojas, and Y. Ciro, “A review of polyvinyl alcohol derivatives: Promising materials for pharmaceutical and biomedical applications,” African Journal of Pharmacy and Pharmacology, vol. 8, pp. 674–684, 2014.

[14] T. S. Gaaz, A. B. Sulong, M. N. Akhtar, A. A. H. Kadhum, A. B. Mohamad, and A. A. Al-Amiery, “Properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites,” Molecules, vol. 20, pp. 22833–22847, 2015.

[15] M. Tsuda, “Schotten‐baumann esterification of poly(vinyl alcohol). II,” Die Makromolekulare Chemie: Macromolecular Chemistry and Physics, vol. 72, pp. 183–190, 1964.

[16] N. B. Halima, “Poly(vinyl alcohol): Review of its promising applications and insights into biodegradation,” RSC Advances, vol. 6, pp. 39823–39832, 2016.

[17] W. Zhang, X. Yang, C. Li, M. Liang, C. Lu, and Y. Deng, “Mechanochemical activation of cellulose and its thermoplastic polyvinyl alcohol ecocomposites with enhanced physicochemical properties,” Carbohydrate Polymers, vol. 83, pp. 257–263, 2011.

[18] N. Chen, L. Li, and Q. Wang, “New technology for thermal processing of poly(vinyl alcohol),” Plastics, Rubber and Composites, vol. 36, pp. 283– 290, 2007.

[19] B. Ramaraj, “Crosslinked poly(vinyl alcohol) and starch composite films. II. Physicomechanical, thermal properties and swelling studies,” Journal of Applied Polymer Science, vol. 103, pp. 909– 916, 2007.

[20] F. Ciner, S. K. A. Solmaz, T. Yonar, and G. E. Ustun, “Treatability studies on wastewater from textile dyeing factories in Bursa, Turkey,” International Journal of Environment and Pollution, vol. 19, pp. 403–407, 2003.

[21] A. Abdulkhani, E. H. Marvast, A. Ashori, Y. Hamzeh, and A. N. Karimi, “Preparation of cellulose/polyvinyl alcohol biocomposite films using 1-n-butyl-3-methylimidazolium chloride,” International Journal of Biological Macromolecules, vol. 62, pp. 379–386, 2013.

[22] K. S. Novoselov, A. K. Geim, S. V. Morozov, D. E. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva, and A. A. Firsov, “Electric field effect in atomically thin carbon films,” Science, vol. 306, pp. 666– 669, 2004.

[23] C. Lee, X. Wei, J. W. Kysar, and J. Hone, “Measurement of the elastic properties and intrinsic strength of monolayer graphene,” Science, vol. 321, pp. 385–388, 2008.

[24] A. A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan, F. Miao, and C. N. Lau, “Superior thermal conductivity of single-layer graphene,” Nano Letters, vol. 8, pp. 902–907, 2008.

[25] J. Lu, T. Wang, and L. T. Drzal, “Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials,” Composites Part A: Applied Science and Manufacturing, vol. 39, pp. 738–746, 2008.

[26] B. Das, K. E. Prasad, U. Ramamurty, and C. N. R. Rao, “Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene,” Nanotechnology, vol. 20, 2009, Art. no. 125705.

[27] J. Liang, Y. Huang, L. Zhang, Y. Wang, Y. Ma, T. Guo, and Y. Chen, “Molecular‐level dispersion of graphene into poly(vinyl alcohol) and effective reinforcement of their nanocomposites,” Advanced Functional Materials, vol. 19, pp. 2297–2302, 2009.

[28] M. V. Naseh, A. A. Khodadadi, Y. Mortazavi, O. A. Sahraei, F. Pourfayaz, and S. M. Sedghi, “Functionalization of carbon nanotubes using nitric acid oxidation and DBD plasma,” World Academy of Science, Engineering and Technology, vol. 49, pp. 177–179, 2009.

[29] H. J. Salavagione, G. Martínez, and M. A. Gómez, “Synthesis of poly(vinyl alcohol)/reduced graphite oxide nanocomposites with improved thermal and electrical properties,” Journal of Materials Chemistry, vol. 19, pp. 5027–5032, 2009.
[30] X. Zhao, Q. Zhang, D. Chen, and P. Lu, “Enhanced mechanical properties of graphenebased poly(vinyl alcohol) composites,” Macromolecules, vol. 43, pp. 2357–2363, 2010.

[31] X. Yang, L. Li, S. Shang, and X. M. Tao, “Synthesis and characterization of layer-aligned poly(vinyl alcohol)/graphene nanocomposites,” Polymer, vol. 51, pp. 3431–3435, 2010.

[32] J. Wang, X. Wang, C. Xu, M. Zhang, and X. Shang, “Preparation of graphene/poly(vinyl alcohol) nanocomposites with enhanced mechanical properties and water resistance,” Polymer International, vol. 60, pp. 816–822, 2011.

[33] Y. Wang and Y. L. Hsieh, “Crosslinking of polyvinyl alcohol (PVA) fibrous membranes with glutaraldehyde and PEG diacylchloride,” Journal of Applied Polymer Science, vol. 116, pp. 3249–3255, 2010.

[34] A. B. Dongil, B. Bachiller-Baeza, A. Guerrero-Ruiz, I. Rodríguez-Ramos, A. Martínez-Alonso, and J. M. D. Tascón, “Surface chemical modifications induced on high surface area graphite and carbon nanofibers using different oxidation and functionalization treatments,” Journal of Colloid and Interface Science, vol. 355, pp. 179–189, 2011.

[35] J. Guo, L. Ren, R. Wang, C. Zhang, Y. Yang, and T. Liu, “Water dispersible graphene noncovalently functionalized with tryptophan and its poly(vinyl alcohol) nanocomposite,” Composites Part B: Engineering, vol. 42, pp. 2130–2135, 2011.
[36] I. Tantis, G. C. Psarras, and D. Tasis, “Functionalized graphene-poly(vinyl alcohol) nanocomposites: Physical and dielectric properties,” Express Polymer Letters, vol. 6, 2012, doi: 10.3144/ expresspolymlett.2012.31.

[37] S. Morimune, T. Nishino, and T. Goto, “Poly(vinyl alcohol)/graphene oxide nanocomposites prepared by a simple eco-process,” Polymer Journal, vol. 44, 2012, Art. no. 10561063.

[38] M. Cano, U. Khan, T. Sainsbury, A. O’Neill, Z. Wang, I. T. McGovern, W. K. Maser, A. M. Benito, and J. N. Coleman, “Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains,” Carbon, vol. 52, pp. 363–371, 2013.

[39] T. N. Zhou, X. D. Qi, and Q. Fu, “The preparation of the poly(vinyl alcohol)/graphene nanocomposites with low percolation threshold and high electrical conductivity by using the large-area reduced graphene oxide sheets,” Express Polymer Letters, vol. 7, pp. 747–755, 2013.

[40] K. J. Ramalingam, N. R. Dhineshbabu, S. R. Srither, B. Saravanakumar, R. Yuvakkumar, and V. Rajendran, “Electrical measurement of PVA/ graphene nanofibers for transparent electrode applications,” Synthetic Metals, vol. 191, pp. 113– 119, 2014.

[41] A. M. Pandele, S. Dinescu, M. Costache, E. Vasile, C. Obreja, H. Iovu, and M. Ionita, “Preparation and in vitro, bulk, and surface investigation of chitosan/graphene oxide composite films,” Polymer Composites, vol. 34, pp. 2116–2124, 2013.

[42] S. Montes, P. M. Carrasco, V. Ruiz, G. Cabañero, H. J. Grande, J. Labidi, and I. Odriozola, “Synergistic reinforcement of poly(vinyl alcohol) nanocomposites with cellulose nanocrystalstabilized graphene,” Composites Science and Technology, vol. 117, pp. 26–31, 2015.
[43] J. Chen, Y. Li, Y. Zhang, and Y. Zhu, “Preparation and characterization of graphene oxide reinforced PVA film with boric acid as crosslinker,” Journal of Applied Polymer Science, vol. 132, 2015, doi: 10.1002/app.42000.

[44] J. Jose, M. A. Al‐Harthi, M. A. A. AlMa'adeed, J. Bhadra Dakua, and S. K. De, “Effect of graphene loading on thermomechanical properties of poly(vinyl alcohol)/starch blend,” Journal of Applied Polymer Science, vol. 132, 2015, doi: 10.1002/app.41827.

[45] H. Z. Li, S. C. Chen, and Y. Z. Wang, “Preparation and characterization of nanocomposites of polyvinyl alcohol/cellulose nanowhiskers/chitosan,” Composites Science and Technology, vol. 115, pp. 60–65, 2015.

[46] A. Anstey, S. Vivekanandhan, A. Rodriguez- Uribe, M. Misra, and A. K. Mohanty, “Oxidative acid treatment and characterization of new biocarbon from sustainable Miscanthus biomass,” Science of The Total Environment, vol. 550, pp. 241–247, 2016.

[47] S. Kashyap, S. K. Pratihar, and S. K. Behera, “Strong and ductile graphene oxide reinforced PVA nanocomposites,” Journal of Alloys and Compounds, vol. 684, pp. 254–260, 2016.

[48] Y. Shi, D. S. Xiong, Y. Peng, and N. Wang, “Effects of polymerization degree on recovery behavior of PVA/PVP hydrogels as potential articular cartilage prosthesis after fatigue test,” Express Polymer Letters, vol. 10, pp. 125–138, 2016.

[49] J. Ma, Y. Li, X. Yin, Y. Xu, J. Yue, J. Bao, and T. Zhou, “Poly(vinyl alcohol)/graphene oxide nanocomposites prepared by in situ polymerization with enhanced mechanical properties and water vapor barrier properties,” RSC Advances, vol. 6, pp. 49448–49458, 2016.

[50] J. Jose and M. A. Al-Harthi, “Citric acid crosslinking of poly(vinyl alcohol)/starch/ graphene nanocomposites for superior properties,” Iranian Polymer Journal, vol. 26, pp. 579–587, 2017.

[51] H. Dai, Y. Huang, and H. Huang, “Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue,” Carbohydrate Polymers, vol. 185, pp. 1–11, 2018.

Full Text: PDF

DOI: 10.14416/j.asep.2022.03.009


  • There are currently no refbacks.