Page Header

Coating of Nano-film Cr2O3 on Welded 304L Stainless Steel and Its Surface Resistance Properties

Nattapong Dussadeeworrarak, Pocharapon Silakoop, Attaphon Kaewvilai, Thammanoon Thaweechai

Abstract


This research presented the Cr2O3 coating and surface properties of welded stainless steel pipe grade 304L. For the welding, process, the 304L specimen was prepared with a single V-butt joint and welded by the tungsten inert gas (TIG) welding process. The weld quality was investigated by visual test (VT), penetrant test (PT) and radiographic test (RT), respectively. After that, the welded specimen was coated with colored-oxide film by chromic reduction. The structural phase and crystallite size of the coated film on welded 304L (C-304L) were analyzed by X-ray diffractometer (XRD) and calculated by Scherrer's equation. The atomic force microscope (AFM) was used for measuring the thickness of the Cr2O3 film. In addition, the surface properties such as hardness and electrical resistance of the coated specimens were tested by Vickers hardness tester and digital multi-meter. Finally, the corrosion resistance of specimens before and after surface coating was determined in extremely corrosive condition such as chlorinated sulfuric acid. The results showed that the C-304L has excellent surface resistance properties for erosion-corrosion applications.

Keywords


Nano-film Cr2O3; Welded stainless steel; Oxidation; Surface resistance

[1] ASTM A312/A312M-18, Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes, 2015.

[2] M. Naeem, J. Iqbal, M. Zakaullah, M. Shafiq, Z.I. Mujahid, J.C. Díaz-Guillén,  C.M. Lopez-Badillo, R.R.M. Sousa, and M.A. Khan, Enhanced wear and corrosion resistance of AISI-304 steel by duplex cathodic cage plasma treatment, Surface and Coatings Technology, 2019, 375, 34–45.

[3] Y. L. He, and Z. B. Xing, Investigations on the microstructure, mechanical properties and corrosion resistance of SUS 304 austenitic stainless steel welded joints by pulsed current gas tungsten arc welding, Materials Research Express, 2019, 6, 088001, 1–15.

[4] X. Wang, Z. Yang, Z. Wang, Q. Shi, B. Xu, C. Zhou, and L. Zhang, The influence of copper on the stress corrosion cracking of 304 stainless steel, Applied Surface Science, 2019, 478, 492–498.

[5] K.S. Prasad, C.S. Rao, and D.N. Rao, A review on welding of AISI 304L austenitic stainless steel, Journal for Manufacturing Science and Production, 2014, 14(1), 1–11.

[6] G.R. Mirshekari, E. Tavakoli, M. Atapour, and B. Sadeghian, Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel, Materials and Design, 2014, 55, 905–911.

[7] P.K. Giridharan, and N. Murugan, Optimization of pulsed GTA welding process parameters for the welding of AISI 304L stainless steel sheets, The International Journal of Advanced Manufacturing Technology, 2009, 40, 478–489.

[8] S. Kumar, and A.S. Shahi, Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints, Materials and Design, 2011, 32, 3617–23.

[9] X.K. Zhu, and Y.J. Chao, Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel, Journal of Materials Processing Technology, 2004, 146, 263–272.

[10] W.S. Lee, C.F. Lin, C.Y. Liu and C.W. Cheng, The effects of strain rate and welding current mode on the dynamic impact behavior of plasma-arc-welded 304L stainless steel weldments, Metallurgical and Materials Transactions A, 2004, 35A, 1501–1515.

[11] T.G. Gooch, Corrosion behavior of welded stainless steel, Welding Journal, 1996, 135s–154s.

[12] A. Wahid, D.L. Olson, and D.K. Matlock, Corrosion of weldments, ASM Handbook: Welding, Brazing, and Soldering, 1993, 6, 1065–1069.

[13] V. Gopalakrishnan, V. BaluSamy, and S.O. Mohammed Rafi, Corrosion study on weldments of austenitic stainless steel, International Journal of Scientific Research Engineering and Technology, 2014, 3(5), 897–901.

[14] M. Aparicio, A. Jitianu, G. Rodriguez, K. Al-Marzoki, M. Jitianu, J. Mosa, and L.C. Klein, Thickness-properties synergy in organic–inorganic consolidated melting-gel coatings for protection of 304 stainless steel in NaCl solutions, Surface and Coatings Technology, 2017, 315, 426–435.

[15] R.T. Loto, C.A. Loto, A.P.I. Popoola, and M. Ranyaoa, Corrosion resistance of austenitic stainless steel in sulphuric acid, International Journal of Physical Sciences, 2012, 7(10), 1677–1688.

[16] E. Kikuti, R. Conrrado, N. Bocchi, S.R. Biaggio, and R.C. Rocha-Filho, Chemical and electrochemical coloration of stainless steel and pitting corrosion resistance studies, Journal of the Brazilian Chemical Society, 2004, 15, 4, 472–480.

[17] Z. Cheng, Y. Xue, Z. Tang, L. An and Y. Tian, A one-step process for chemical coloring on stainless steel, Surface and Coatings Technology, 2008, 202, 4102–4106.

[18] C. Tippayasam, J. Palomas, P. Wiman and A. Kaewvilai, Welded stainless steel: Surface oxidation, characterization, hardness and corrosion resistance, Key Engineering Materials, 2020, 856, 106-111.

[19] Z.B. Zheng, and Y.G. Zheng, Effects of surface treatments on the corrosion and erosion-corrosion of 304 stainless steel in 3.5% NaCl solution, Corrosion Science, 2016, 112, 657–668.

[20] J.E. Qu, C. Yu, R. Cui, J. Qin, H. Wang, and Z. Cao, Preparation of super-hydrophobic and corrosion resistant colored films on chemically etched 304 stainless steel substrate, Surface and Coatings Technology, 2018, 354, 236–245.

[21] L.V. Taveira, G. Frank, H.P. Strunk, and L.F.P. Dick, The influence of surface treatments in hot acid solutions on the corrosion resistance and oxide structure of stainless steels, Corrosion Science, 2005, 47, 757–769.

[22] E. Kikuti, N. Bocchi, J.L. Pastol, M.G. Ferreira, M.F. Montemor, M.D.C. Belo, and A.M. Simoes, Composition and structure of coloured oxide films on stainless steel formed by triangular current scan and cathodic hardening treatment, Corrosion Science, 2007, 49 2303–2314.

[23] ASTM D1193-06, Standard Specification for Reagent Water, 2011.

[24] M.M. Abdullah, F.M. Rajab, and S.M. Al-Abbas, Structural and optical characterization of Cr2O3 nanostructures: Evaluation of its dielectric properties, AIP ADVANCES, 2014, 4, 027121,1–11.

[25] N. Srisuwan, N. Kumsri, T. Yingsamphancharoen, and A. Kaewvilai, Hardfacing Welded ASTM A572-Based, High-Strength, Low-Alloy Steel: Welding, Characterization, and Surface Properties Related to the Wear Resistance. Metals, 2019, 9(2), 244.

[26] C. Tippayasam, and A. Kaewvilai, Steel reinforced polyethylene corrugated pipe: Extrusion welding, investigation and mechanical testing, Welding Journal, 2020, 99(2), 52s-58s.

[27] ASTM G5-14, Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements, 2014.

[28] ASME Section V, Nondestructive Examination, 2017.

[29] S.E. Ziemniak, L.M. Anovitz, R.A. Castelli, and W.D. Porter, Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4, and CoCr2O4, The Journal of Chemical Thermodynamics, 2007, 39(11), 1474–1492.

[30] T. Yingsamphancharoen, N. Srisuwan, and A. Rodchanarowan, The Electrochemical Investigation of the Corrosion Rates of Welded Pipe ASTM A106 Grade B. Metals, 2016, 6, 207. 

Full Text: PDF

DOI: 10.14416/j.ind.tech.2021.11.002

Refbacks

  • There are currently no refbacks.